Electronic control unit

Use application field

For 24V Hybrid vehicle barriers

  • It is compatible with all 5-pins receivers and all photocells (non BUS included) thanks to 2easy technology.
  • Equipped with 2 integrated Loop detectors.


Item code





Power supply voltage

220-240V~ 50/60 Hz

standby power

7 W

Motor max power

240 W

Max. accessories load

800 mA

Accessories power supply



3 keys (+, -, F) and display, 1 automatic set-up key

Operating logic

Automatic, Automatic 1, Semi-automatic, Parking, Parking-Automatic, Condominium, Condominium-Automatic, Manned, Remote, Custom

Programmable functions

Logic, Pause time, Opening/Closing power, Opening/Closing speed, Loop 1 and 2, Pre-flashing, Work time, Obstacle detection sensitivity, Cycle counter for service, LED output, Failsafe output, Status output, Service request, Beam LED lighting output

Work time

Programmable (from 0 to 4.1 min)

Pause time

Programmable (from 0 to 4.1 min)

Thrust power

Programmable on 50 levels

Speed adjustment

Programmable on 50 levels

Terminal board inputs

Loop 1, Loop 2, Open, Close, Closing safety devices, Stop, Emergency, Power supply 36V , Battery XBAT, BUS 2easy

Terminal board outputs

Flashing lamp 24V, Brushless motor, Accessories power supply 24V , 4 programmable outputs of which one with relay

Rapid connector

Encoder, Beam release sensor, Integrated flashing traffic light, USB (for updating firmware), 5-pin minidec, decoder, RP/RP2 receiver.

Integrated detector 2 independent channels

Real time self-calibration, Sensitivity independent of the loop geometry, Loop work frequency adjustment, Occupied loop message with LED display, Loop status can be directed on programmable outputs

Protection Fuses

4 self-resetting

Operating ambient temperature

-20°C ÷ +55°C


© 1965 - const now = new Date(); const currentYear = now.getFullYear(); document.write(currentYear); FAAC SPA Soc. Unipersonale P.IVA 03820731200 - All rights reserved